Wood-Glide - Company Message
                                                     MATERIAL SAFETY DATA SHEET  
                                                    
             SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME:                                                                     WOOD-GLIDE 1008
IDENTIFICATION NUMBER:                                                     SFML06989 A 
PRODUCT USE/CLASS

SUPPLIER:          PAR Enterprises                             MANUFACTURER:       PAR Enterprises                                                                     606 North Main Street                                                           606 North Main Street                                                             Highlands, Texas 77562                                                       Highlands, Texas 77562
 EMERGENCY TEL.: 888-222-2225           EMERGENCY TEL.: 888-222-2225                             
 24 HOUR EMERGENCY PHONE                24 HOUR EMERGENCY PHONE 

PREPARED: MFL, PHONE: 888-222-2225           PREPARE DATE: 5/8/06       REPLACES DATE: 01/23/05
           
                 SECTION 2 - Composition/INFORMATION ON INGREDIENTS

ITEM                       CHEMICAL NAME                                  CASE NUMBER                  WT/WT LESS THAN                
01                            HEXANE                                                 110-54-3                                   65.0%
02                            ISOBUTANE/PROPANE                         75-28-5 & 74-98-6                    25.0%

                                                                                  EXPOSURE LIMITS

                          ACGIH                                                       OSHA                          COMPANY
ITEM     TLV-TWA                TLV-STEL               PEL-TWA                PEL-CEILING          TLV-TWA                SKIN
01          NO INFO                     NO INFO                 500 ppm                  1000 ppm                NO INFO                 NO
02          NO INFO                     NO INFO                 NO INFO                   NO INFO                 1000 ppm                NO (See Section 16 for abbreviation legend) 

                         SECTION 3 - HAZARDS IDENTIFICATION 

EMERGENCY OVERVIEW: KEEP FROM REACH OF CHILDREN. DO NOT PUNCTURE, INCINERATE, OR PLACE AEROSOL PRODUCT CONTAINERS IN COMPACTORS. CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN EMPTIED SINCE CONTAINERS RETAIN PRODUCT RESIDUES (VAPOR, LIQUID, AND/OR SOLID). ALL HAZARD PRECAUTIONS GIVEN MUST BE OBSERVED. DO NOT FLAME CUT, BRAZE, OR USE WELDING TORCH. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING THIS PRODUCT MAY BE HARMFUL OR FATAL. 

EFFECTS OF OVEREXPOSURE - EYE CONTACT: CAN CAUSE SEVERE IRRITATION, REDNESS, TEARING, BLURRED VISION. 

EFFECTS OF OVEREXPOSURE - SKIN CONTACT: PROLONGED OR REPEATED CONTACT CAN CAUSE MODERATE IRRITATION, DEFATTING, DERMATITIS. 

EFFECTS OF OVEREXPOSURE - INHALATION: EXCESSIVE INHALATION OF VAPORS CAN CAUSE NASAL AND RESPIRATORY IRRITATION, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE, POSSIBLE UNCONSCIOUSNESS, AND EVEN ASPHYXIATION. OVEREXPOSURE MAY CAUSE DAMAGE TO THE NERVOUS SYSTEM.    

EFFECTS OF OVEREXPOSURE - INGESTION: NO INFORMATION 

EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: OVEREXPOSURE TO THIS MATERIAL (OR ITS COMPONENTS) HAS APPARENTLY BEEN FOUND TO CAUSE THE FOLLOWING EFFECTS IN LABORATORY ANIMALS: KIDNEY DAMAGE, LIVER DAMAGE. PRIMARY ROUTE(S) OF ENTRY: SKIN CONTACT, INHALATION, EYE CONTACT 

                          SECTION 4 - FIRST AID MEASURES 

FIRST AID - EYE CONTACT: FLUSH WITH LARGE AMOUNTS OF WATER, LIFTING UPPER AND LOWER LIDS OCCASIONALLY, GET MEDICAL ATTENTION. FIRST AID - SKIN CONTACT: THOROUGHLY WASH EXPOSED AREA WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. LAUNDER CONTAMINATED CLOTHING BEFORE RE-USE. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. FIRST AID - INHALATION: REMOVE INDIVIDUAL TO FRESH AIR. IF BREATHING IS DIFFICULT, ADMINISTER OXYGEN, GIVE ARTIFICIAL RESPIRATION IF BREATHING HAS STOPPED. KEEP PERSON WARM AND QUIET. GET MEDICAL ATTENTION. FIRST AID - INGESTION: DO NOT INDUCE VOMITING. GIVE TWO GLASSES OF WATER IF CONSCIOUS. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. GET IMMEDIATE MEDICAL ATTENTION. 


                      SECTION 5 - FIRE FIGHTING MEASURES 

FLASH POINT: -156 F                                                                           LOWER EXPLOSIVE LIMIT: 1%
(PENSKY-MARTENS C.C.)                                                                   UPPER EXPLOSIVE LIMIT: 9.5% 

AUTOIGNITION TEMPERATURE: N.D. 

EXTINGUISHING MEDIA: CO2, DRY CHEMICAL, FOAM, WATER, FOG 

UNUSUAL FIRE AND EXPLOSION HAZARDS: VAPORS ARE HEAVIER THAN AIR AND TRAVEL ALONG THE GROUND OR MAY BE MOVED BY VENTILATION AND IGNITED BY IGNITION SOURCES AT LOCATIONS DISTANT FROM MATERIAL HANDLING POINT. FOR AEROSOL PRODUCTS - EXPOSURE TO TEMPERATURES OVER 130F MAY CAUSE CONTAINERS TO BURST, RELEASING HIGHLY FLAMMABLE GAS. 

SPECIAL FIREFIGHTING PROCEDURES: WEAR SELF-CONTAINED BREATHING APPARATUS WITH A FULL FACEPIECE OPERATED IN PRESSURE-DEMAND OR OTHER POSITIVE PRESSURE MODE WHEN FIGHTING FIRES. KEEP FIRE EXPOSED CONTAINERS COOL WITH WATER FOG. 

                  SECTION 6 - ACCIDENTAL RELEASE MEASURES 

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: ELIMINATE SOURCES OF IGNITION & VENTILATE AREA. PERSONS NOT PROPERLY EQUIPPED SHOULD BE EXCLUDED FROM AREA. STOP SPILL AT SOURCE - PREVENT SPREADING. AVOID INHALATION OF VAPORS. AVOID SKIN CONTACT WITH LIQUID. SOAK UP ON ABSORBENT MATERIAL AND PLACE INTO PROPER CONTAINER FOR DISPOSAL. USE NON-SPARKING SCOOPS FOR FLAMMABLE MATERIALS. CLEAN WALKING SURFACES THOROUGHLY TO REDUCE SLIPPING HAZARD.  

                       SECTION 7 - HANDLING AND STORAGE 

HANDLING: NO INFORMATION 

STORAGE: DO NOT STORE ABOVE 120F. DO NOT STORE IN DIRECT SUNLIGHT. KEEP AWAY FROM HEAT SOURCES, OPEN FLAME, SPARKS. 

SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION

ENGINEERING CONTROLS: PROVIDE SUFFICIENT MECHANICAL VENTILATION (GENERAL AND/OR LOCAL EXHAUST) VENTILATION TO MAINTAIN EXPOSURE BELOW LTV(S). 

RESPIRATORY PROTECTION: IF WORK PLACE EXPOSURE LIMITS OF PRODUCT OR ANY COMPONENT IS EXCEEDED, USE A NIOSH/MSHA APPROVED RESPIRATOR. CONSULT YOUR SAFETY EQUIPMENT SUPPLIER FOR RECOMMENDATIONS. 

SKIN PROTECTION: WEAR IMPERVIOUS GLOVES IF METHOD OF USE INVOLVES SKIN CONTACT WITH PRODUCT. CONSULT YOUR SAFETY SUPPLY VENDOR FOR GLOVE RECOMMENDATIONS. 

EYE PROTECTION: WEAR SAFETY GLASSES AT MINIMUM, MORE EXTENSIVE PROTECTION MAY BE NECESSARY DEPENDING ON HOW THE PRODUCT IS TO BE USED. 

OTHER PROTECTIVE EQUIPMENT: WEAR IMPERVIOUS CLOTHING IF BODILY EXPOSURE IS ANTICIPATED CONSULT YOUR SAFETY SUPPLY VENDOR FOR RECOMMENDATIONS. 

HYGIENIC PRACTICES: WASH HANDS BEFORE EATING OR SMOKING. SMOKE IN DESIGNATED AREAS ONLY. REMOVE AND LAUNDER CLOTHING IF CONTAMINATED 

               SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES 

BOILING RANGE:          -43 -159F                        VAPOR DENSITY:           IS HEAVIER THAN AIR
ODOR:                           MILD SOLVENT             ODOR THRESHOLD:       ND
APPEARANCE:             STRAW COLORED       EVAPORATION RATE:      IS FASTER THAN BUTYL ACETATE
SOLUBILITY IN H2O:    NEGLIGIBLE                                                                                       
FREEZE POINT:           ND                                    SPECIFIC GRAVITY:       0.9624
VAPOR PRESSURE:     ND                                    pH @ 0.0.%:                    NA
PHYSICAL STATE:       LIQUID                              VISCOSITY:                      ND
COEFFICIENT OF WATER/OIL DISTRIBUTION: ND (See Section 16 for abbreviation legend) 

                       SECTION 10 -STABILITY AND REACTIVITY 

CONDITIONS TO AVOID: HEAT, SPARKS, WELDING ARCS, OPEN FLAME, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION. INCOMPATIBILITY: STRONG OXIDIZERS. HAZARDOUS DECOMPOSITION PRODUCTS: CARBON MONOXIDE AND CARBON DIOXIDE. VARIOUS HYDROCARBONS.   

HAZARDOUS POLYMERIZATION: WILL NOT OCCUR UNDER NORMAL CONDITIONS. STABILITY: THIS PRODUCT IS STABLE UNDER NORMAL STORAGE CONDITIONS. 

                      SECTION 11 - TOXICOLOGICAL PROPERTIES 

NO PRODUCT OR COMPONENT TOXICOLOGICAL INFORMATION IS AVAILABLE. 

    SECTION 12 - ECOLOGICAL INFORMATION ECOLOGICAL INFORMATION: 

NO INFORMATION. 

        SECTION 13 - DISPOSAL CONSIDERATIONS DISPOSAL METHOD: 

DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE AND FEDERAL REGULATIONS. 

                  SECTION 14 - TRANSPORTATION INFORMATION 
DOT PROPER SHIPPING NAME: AEROSOLS 
DOT TECHNICAL NAME: 
DOT HAZARD CLASS: 2.1                                                                                   HAZARD SUBCLASS: NONE 
DOT UN/NA NUMBER: UN1950           PACKING GROUP: NONE                     RESP. GUIDE PAGE: 126 
ADDITIONAL INFORMATION: FOR DOMESTIC GROUND AND AIR SHIPMENT THIS PRODUCT MAY BE SHIPPED AS A CONSUMBER COMMODITY ORM-D. OUTER CARTONS MUST HAVE THE ORM-D OR ORM-D AIR DESIGNATION. (OUR ORIGINAL CARTONS ARE PREPRINTED WITH THE ORM-D DESIGNATION FOR GROUND SHIPMENT) 

                        SECTION 15 - REGULATORY INFORMATION 

US FEDERAL REGULATIONS: AS FOLLOWS - 

OSHA: HAZARDOUS BY DEFINITION OF HAZARD COMMUNICATION STANDARD (29 CFR 1910.1200) 

CERCLA - SARA HAZARD CATEGORY: THIS PRODUCT HAS BEEN REVIEWED ACCORDING TO THE EPA ‘HAZARD CATEGORIES’ PROMULGATED UNDER SECTIONS 311 AND 312 OF THE SUPERFUND AMENDMENT AND REAUTHORIZATION ACT OF 1986 (SARA TITLE III) AND IS CONSIDERED, UNDER APPLICABLE DEFINITIONS, TO MEET THE FOLLOWING CATEGORIES: 

IMMEDIATE HEALTH HAZARD     CHRONIC HEALTH HAZARD    FIRE HAZARD 

SARA SECTION 313: THIS PRODUCT CONTAINS THE FOLLOWING SUBSTANCES SUBJECT TO THE REPORTING REQUIREMENTS OF SECTION 313 OF TITLE III OF THE SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 AND 40 CFR PART 372:

                         CHEMICAL NAME                                  CASE NUMBER                           WT/WT LESS THAN 
                         HEXANE                                                 110-54-3                                                   65.0% 

TOXIC SUBSTANCES CONTROL ACT: THIS PRODUCT CONTAINS THE FOLLOWING CHEMICAL SUBSTANCES SUBJECT TO THE REPORTING REQUIREMENTS OF TSCA 12(B) IF EXPORTED FROM THE UNITED STATES.

                          CHEMICAL NAME                                  CASE NUMBER                           WT/WT LESS THAN
                                NO INFORMATION AVAILABLE 

INTERNATIONAL REGULATIONS: AS FOLLOWS - 

CANADIAN WHMIS: THIS MSDS HAS BEEN PREPARED IN COMPLIANCE WITH CONTROLLED PRODUCT REGULATIONS EXCEPT FOR THE USE OF THE 16 HEADINGS. 

CANADIAN WHMIS CLASS: NO INFORMATION AVAILABLE. 

ON JUNE 30, 1993 THE OSHA Z-1-A TABLE WAS REVOKED AND OSHA REVERTED BACK TO THEIR PRIOR EXPOSURE LIMITS. THE VALUES ON THIS MSDS REFLECT THE ROLL BACK TO THE PRIOR VALUES. SOME STATES MAY CONTINUE TO ENFORCE THE 1993 LIMITS 

                             SECTION 16 - OTHER INFORMATION 

HMIS RATINGS - HEALTH: 2                               FLAMMABILITY: 4                                      REACTIVITY: 0 

PREVIOUS MSDS REVISION DATE: 07/23/96 

REASON FOR REVISION: FORMULA REVISION 

VOC CONTENT: 84.0% BY WEIGHT, 554 GRAMS/LITER TOTAL PRODUCT, 554 GRAMS/LITER LESS WATER AND EXEMPT, 4.62 LBS/GAL. 

LEGEND: NA - NOT APPLICABLE, NE - NOT ESTABLISHED, ND - NOT DETERMINED 

                                           DISCLAIMER 

THE INFORMATION CONTAINED ON THIS MSDS HAS BEEN CHECKED AND SHOULD BE ACCURATE. HOWEVER, IT IS THE RESPONSIBILITY OF THE USER TO COMPLY WITH ALL FEDERAL, STATE, AND LOCAL LAWS AND REGULATIONS. THE ENVIRONMENTAL INFORMATION AND HAZARDOUS MATERIAL IDENTIFICATION SYSTEM HAVE BEEN INCLUDED BY PERFORMANCE AR, INC. IN ORDER TO PROVIDE ADDITIONAL HEALTH AND HAZARD CLASSIFICATION INFORMATION. THE RATINGS RECOMMEND ARE BASED UPON THE CRITERIA SUPPLIED BY THE DEVELOPERS OF THESE RATING SYSTEMS, TOGETHER WITH APPLIED PERFORMANCE TECHNOLOGIES INTERPRETATION OF THE AVAILABLE DATA. PROPER PERSONAL PROTECTIVE EQUIPMENT VARIES WIDELY WITH CONDITIONS OF USE AND ANTICIPATED EXPOSURE. WE RECOMMEND THAT A SUPERVISOR OR OTHER QUALIFIED PERSON DETERMINE PROPER PPE FOR INTENDED USE.